User`s guide

Chapter 15 Remote Management Screens
LAN-Cell 2 User’s Guide
325
15.2.2.2 Example 2: Linux
This section describes how to access the LAN-Cell using the OpenSSH client program that
comes with most Linux distributions.
1 Test whether the SSH service is available on the LAN-Cell.
Enter “telnet 192.168.1.1 22” at a terminal prompt and press [ENTER]. The
computer attempts to connect to port 22 on the LAN-Cell (using the default IP address of
192.168.1.1).
A message displays indicating the SSH protocol version supported by the LAN-Cell.
Figure 198 SSH Example 2: Test
2 Enter “ssh –1 192.168.1.1”. This command forces your computer to connect to
the LAN-Cell using SSH version 1. If this is the first time you are connecting to the
LAN-Cell using SSH, a message displays prompting you to save the host information of
the LAN-Cell. Type “yes” and press [ENTER].
Then enter the password to log in to the LAN-Cell.
Figure 199 SSH Example 2: Log in
3 The SMT main menu displays next.
15.2.2.3 Secure FTP Using SSH Example
This section shows an example on file transfer using the OpenSSH client program. The
configuration and connection steps are similar for other SSH client programs. Refer to your
SSH client program user’s guide.
1 Enter “sftp –1 192.168.1.1”. This command forces your computer to connect to
the LAN-Cell for secure file transfer using SSH version 1. If this is the first time you are
connecting to the LAN-Cell using SSH, a message displays prompting you to save the
host information of the LAN-Cell. Type “yes” and press [ENTER].
2 Enter the password to login to the LAN-Cell.
$ telnet 192.168.1.1 22
Trying 192.168.1.1...
Connected to 192.168.1.1.
Escape character is '^]'.
SSH-1.5-1.0.0
$ ssh –1 192.168.1.1
The authenticity of host '192.168.1.1 (192.168.1.1)' can't be
established.
RSA1 key fingerprint is
21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.1' (RSA1) to the list of
known hosts.
Administrator@192.168.1.1's password: