User`s guide

Chapter 1 Getting to Know Your LAN-Cell 2
LAN-Cell 2 User’s Guide
30
1.5 Front Panel Indicators
Figure 4 Front Panel
The following table describes the LAN-Cell’s front panel indicator lights.
Table 1 Front Panel Lights
LED COLOR STATUS DESCRIPTION
PWR Off The LAN-Cell is turned off.
Green On The LAN-Cell is ready and running.
Flashing Power-on Self Test is in progress. (approximately 60 sec)
Red On The power to the LAN-Cell is too low.
LAN/DMZ 1-4 Off The LAN/DMZ is not connected.
Green On The LAN-Cell has a successful 10Mbps Ethernet
connection.
Flashing The 10M LAN is sending or receiving packets.
Orange On The LAN-Cell has a successful 100Mbps Ethernet
connection.
Flashing The 100M LAN is sending or receiving packets.
WAN Off The WAN connection is not ready, or has failed.
Green On The LAN-Cell has a successful 10Mbps WAN connection.
Flashing The 10M WAN is sending or receiving packets.
Orange On The LAN-Cell has a successful 100Mbps WAN connection.
Flashing The 100M WAN is sending or receiving packets.
AUX Green Off The dial backup port is not connected to a remote server.
On The dial backup port is connected to a remote server.
Flashing The dial backup port is sending or receiving packets.
WLAN Green Off The wireless LAN is not ready, or has failed.
On The wireless LAN is ready.
Flashing The wireless LAN is sending or receiving packets.
CELL Off There is no 3G card inserted in the LAN-Cell.
Green Flashing 3G card is initializing OR is not registered on the carrier
network OR there is no compatible cellular service available.
On A 3G card ready to make a connection (dial).
Orange On The 3G WAN connection is established.
Flashing The 3G WAN is sending or receiving packets.
Green/
Orange
Flashing Cellular signal strength or quality is Poor. Connections may
be unreliable.