User`s guide

Chapter 10 IPSec VPN Config Screens
LAN-Cell 2 User’s Guide
229
Figure 136 SECURITY > VPN > VPN Rules (Manual) > Edit
The following table describes the labels in this screen.
Table 82 SECURITY > VPN > VPN Rules (Manual) > Edit
LABEL DESCRIPTION
Property
Active Select this check box to activate this VPN policy.
Name Type up to 32 characters to identify this VPN policy. You may use any character,
including spaces, but the LAN-Cell drops trailing spaces.
Allow NetBIOS
Traffic Through
IPSec Tunnel
NetBIOS (Network Basic Input/Output System) are TCP or UDP packets that
enable a computer to find other computers. It may sometimes be necessary to
allow NetBIOS packets to pass through VPN tunnels in order to allow local
computers to find computers on the remote network and vice versa.
Select this check box to send NetBIOS packets through the VPN connection.
Local Network Local IP addresses must be static and correspond to the remote IPSec router's
configured remote IP addresses.
Two active SAs cannot have the local and remote IP address(es) both the same.
Two active SAs can have the same local or remote IP address, but not both. You
can configure multiple SAs between the same local and remote IP addresses, as
long as only one is active at any time.