User`s guide

Chapter 7 Wireless LAN (WLAN) Screens
LAN-Cell 2 User’s Guide
155
7.8.1 No Security
" If you do not enable any wireless security on your LAN-Cell, your network is
accessible to any wireless networking device within range.
Figure 82 WIRELESS > Wi-Fi > Security: None
The following table describes the wireless LAN security labels in this screen.
7.8.2 Static WEP
Static WEP provides a mechanism for encrypting data using encryption keys. Both the AP and
the wireless stations must use the same WEP key to encrypt and decrypt data.
Your LAN-Cell allows you to configure up to four 64-bit, 128-bit or 152-bit WEP keys, but
only one key can be used at any one time.
In order to configure and enable WEP encryption, click WIRELESS > Wi-Fi > Security >
Edit.
Table 48 WIRELESS > Wi-Fi > Security: None
LABEL DESCRIPTION
Name Type a name (up to 32 printable 7-bit ASCII characters) to identify this security profile.
Security Mode Select None to allow wireless clients to communicate with the access points without
any data encryption.
Apply Click Apply to save your customized settings and exit this screen.
Cancel Click Cancel to exit this screen without saving.