User`s guide

Chapter 7 Wireless LAN (WLAN) Screens
LAN-Cell 2 User’s Guide
145
Figure 76 WLAN Port Role Example
" Do the following if you are configuring from a computer connected to a LAN,
DMZ or WLAN port and changing the port's role:
1 A port's IP address varies as its role changes, make sure your computer's IP address is in
the same subnet as the LAN-Cell's LAN, DMZ or WLAN IP address.
2 Use the appropriate LAN, DMZ or WLAN IP address to access the LAN-Cell.
To change your LAN-Cell’s port role settings, click NETWORK > WLAN > Port Roles.
The screen appears as shown.
The radio buttons correspond to Ethernet ports on the front panel of the LAN-Cell. On the
LAN-Cell, ports 1 to 4 are all LAN ports by default.
" Your changes are also reflected in the LAN and/or DMZ Port Roles screen.
Figure 77 NETWORK > WLAN > Port Roles