User`s guide

Chapter 7 Wireless LAN (WLAN) Screens
LAN-Cell 2 User’s Guide
143
The LAN-Cell has a single WLAN interface. Even though more than one of ports 1~4 may be
in the WLAN port role, they are all still part of a single physical Ethernet interface and all use
the same IP address.
The LAN-Cell supports three logical WLAN interfaces via its single physical WLAN Ethernet
interface. The LAN-Cell itself is the gateway for each of the logical WLAN networks.
When you use IP alias, you can also configure firewall rules to control access between the
WLAN's logical networks (subnets).
" Make sure that the subnets of the logical networks do not overlap.
To change your LAN-Cell’s IP alias settings, click NETWORK > WLAN > IP Alias. The
screen appears as shown.
Figure 75 NETWORK > WLAN > IP Alias
The following table describes the labels in this screen.
Table 41 NETWORK > WLAN > IP Alias
LABEL DESCRIPTION
Enable IP Alias 1,
2
Select the check box to configure another WLAN network for the LAN-Cell.
IP Address Enter the IP address of your LAN-Cell in dotted decimal notation.
Alternatively, click the right mouse button to copy and/or paste the IP address.
IP Subnet Mask Your LAN-Cell will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the subnet
mask computed by the LAN-Cell.