User`s guide

Chapter 5 WAN & 3G Cellular Screens
LAN-Cell 2 User’s Guide
119
" To have the LAN-Cell send you an E-Mail when Cell-Sentry detects a specified
threshold, be sure to configure the LAN-Cell’s Log/Alert E-Mail feature
(Section 21.3 on page 377).
Restart budget
counter on
Select the date on which the LAN-Cell resets the budget every month. If the date
you selected is not available in a month, such as 30th or 31th, the LAN-Cell resets
the budget on the last day of the month. To more closely match your ISP’s usage
counters, set this value to the date of your monthly billing cycle.
Actions when
over budget
Specify the actions the LAN-Cell takes when the time or data limit is exceeded.
Select Log to create a log entry.
Select Alert to create an alert. This option is available only when you select Log.
If you select Log, you can also select recurring every to have the LAN-Cell send
the log for this event periodically and specify how often (from 1 to 4600 minutes) to
send a log.
Select Allow to permit new cellular connections or Disallow to drop/block new
cellular connections.
Select Keep to maintain the existing cellular connection or Drop to disconnect it.
You cannot select Allow and Drop at the same time.
If you select Disallow and Keep, the LAN-Cell allows you to transmit data using the
current connection, but you cannot build a new connection if the existing
connection is disconnected.
Actions when
over % of time
budget or % of
data budget
Specify the actions the LAN-Cell takes when the specified percentage of time
budget or data limit is exceeded. Enter a number from 1 to 99 in the percentage
fields. If you change the value after you configure and enable budget control, the
LAN-Cell resets the statistics.
Select Log to create a log entry.
Select Alert to create an alert. This option is available only when you select Log.
If you select Log, you can also select recurring every to have the LAN-Cell send
the log for this event periodically and specify how often (from 1 to 4600 minutes) to
send a log.
Apply Click Apply to save your changes back to the LAN-Cell.
Reset Click Reset to begin configuring this screen afresh.
Table 31 NETWORK > WAN > Cellular (Cell-Sentry) (continued)
LABEL DESCRIPTION