User`s guide

Chapter 5 WAN & 3G Cellular Screens
LAN-Cell 2 User’s Guide
108
Figure 56 NETWORK > WAN > WAN (PPPoE Encapsulation)
The following table describes the labels in this screen.
Table 28 NETWORK > WAN > WAN (PPPoE Encapsulation)
LABEL DESCRIPTION
ISP Parameters for Internet Access
Encapsulation Select PPPoE for a dial-up connection using PPPoE.
Service Name Type the PPPoE service name provided to you by your ISP. PPPoE uses a service
name to identify and reach the PPPoE server.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the user name above.
Retype to
Confirm
Type your password again to make sure that you have entered is correctly.
Authentication
Type
The LAN-Cell supports PAP (Password Authentication Protocol) and CHAP
(Challenge Handshake Authentication Protocol). CHAP is more secure than PAP;
however, PAP is readily available on more platforms.
Use the drop-down list box to select an authentication protocol for outgoing calls.
Options are:
CHAP/PAP - Your LAN-Cell accepts either CHAP or PAP when requested by this
remote node.
CHAP - Your LAN-Cell accepts CHAP only.
PAP - Your LAN-Cell accepts PAP only.