Specification Sheet

ANT-121-M22
Vandal Resistant 4G/LTE MIMO Omni Antenna
- 1 of 8 -
Data Sheet: Rev A 03/01/20
© Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
www.proxicast.com • 1-877-777-7694
• Kiosks
• Vending Machines
• Digital Signage
• Video Surveillance
• Point-of-Sale Terminals
• SCADA / Telemetry / PLCs
• Vandal Resistant
• Low Profile ~ 3 inches Tall
• Weatherproof
• Compatible with all 3G & 4G/LTE Networks
• Compatible with most Cellular Modems/Routers
• 3 – 5 dBi Peak Gain
• Omni-Directional MIMO
• SMA Male Connector on 10 ft Low-Loss Coax
Part No. Description
ANT-121-M22
Vandal Resistant MIMO Low
Profile 4G/LTE Omni-
Directional Screw Mount
Antenna - 10 ft Coax Lead
This low profile (~ 3 inches tall) fixed screw mount omni-directional antenna provides 3 to 5 dBi of gain and
supports all cellular frequency bands for AT&T, Verizon, Sprint, T-Mobile, Bell, Rogers, Telus and other cellular
carriers worldwide.
Connect this antenna to existing MIMO-capable cellular modems, routers or other 3G/4G/LTE enabled devices
which have 2 SMA external antenna connectors.
Ideal for use in vending machines, meter housings, equipment sheds, NEMA enclosures or other locations
requiring a low-profile vandal resistant external antenna. Also suitable for vehicle mounting on buses, vans,
trucks or other mobile installations.
Permanently mounts via a 5/8 in. (16 mm) hole with locking internal nut. Resists vandalism with no exposed
coax cable, high impact ABS radome shell and an extra thick threaded mounting post. Includes 10 ft of low-loss
paired RG174 coax fed through center mounting post. Includes "L" bracket for optional wall mounting.
Integrated SMA male plug connectors mates with SMA female jacks found on most cellular modems and
routers.
Completely waterproof (IP67) when properly installed with post extending into a water-tight enclosure. Not
waterproof when used exclusively with wall bracket.
For optimum performance this antenna should be mounted on a flat, horizontal metal surface at least 8 inches in
diameter.
General Description
Ordering Information
Product Features
Applications