Specification Sheet

ANT-121-002
Vandal Resistant 3G/4G/LTE Omni-Directional Antenna
- 1 of 7 -
Data Sheet: Rev B 04/23/18
© Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
Proxicast: 1-877-777-7694
• Kiosks
• Vending Machines
• Digital Signage
• Video Surveillance
• Point-of-Sale Terminals
• SCADA / Telemetry / PLCs
• Vandal Resistant
• Low Profile ~ 3 inches Tall
• Weatherproof
• Compatible with all 3G & 4G/LTE Networks
• Compatible with most Cellular Modems/Routers
• 3 – 5 dBi Peak Gain
• Omni-Directional
• SMA Male Connector on 10 ft Low-Loss Coax
Part No. Description
ANT-121-002
Vandal Resistant Low Profile
3G/4G/LTE Omni-Directional
Antenna - 3-5 dBi Gain - Fixed
Mount - 10 ft Coax Lead
This low profile (~ 3 inches tall) fixed screw mount omni-directional antenna provides 3 to 5 dBi of gain and
supports all cellular frequency bands for AT&T, Verizon, Sprint, T-Mobile, Bell, Rogers, Telus and other cellular
carriers worldwide.
Ideal for use in vending machines, meter housings, equipment sheds, NEMA enclosures or other locations
requiring a low-profile vandal resistant external antenna. Also suitable for vehicle mounting on buses, vans,
trucks or other mobile installations.
Permanently mounts via a 5/8 in. (16 mm) hole with locking internal nut. Resists vandalism with no exposed
coax cable, high impact ABS radome shell and an extra thick threaded mounting post. Includes 10 ft of low-loss
RG58U coax fed through center mounting post. Includes "L" bracket for optional wall mounting.
Integrated SMA male plug connector mates with SMA female jack found on most cellular modems and routers.
Completely waterproof (IP67) when properly installed with post extending into a water-tight enclosure. Not
waterproof when used exclusively with wall bracket.
For optimum performance this antenna should be mounted on a flat, horizontal metal surface at least 8 inches in
diameter.
General Description
Ordering Information
Product Features
Applications