Service Manual

8
Mortise Service Manual
PROXESS MX CASE AND STRIKE DIMENSIONS
CYLINDER/KEYING
Due to the extra thick trim that houses RF and battery components, Proxess mortise locks will require special length (1
3
4
inch) cylinders. When using other manufacturers’ cylinders, ensure that you have the proper 1
3
4
inch long
cylinder.
Proxess locks are supplied with only small format removable cores and we strongly recommend that these locks are
keyed differently than other cylinders in the existing lock system. Keys for Proxess locks are meant to be used only in
emergency situations that require a mechanical key bypass. Proxess software monitors when a mechanical key is used.
Proxess supplies custom keyed cores to match existing Proxess locks/systems. You will see a core mark on the face of
the core. Simply provide your account name and this core mark in order to receive custom “matching” keying. Most
Proxess cores contain several “spool” segments standard as a safeguard to resist picking. The software will notify the
administrator of entry audits when access was gained by a key or in the unlikely event the lock was picked.