Service Manual

Mortise Service Manual

I. Operation Test

I.1 Insert AA Alkaline batteries (x4) into the battery

compartment

I.2 Green light will turn on and you will hear a beep,

indication that the power is on

I.3 Turn the lever and make sure the lever is free to

rotate

I.4 Testing the Lock

Take the credential, place it in front of the panel and wait for one second. The green light will flash and you

should hear a beep.

2. Turn the handle to actuate the latch and the door can be opened. After about 5-6 seconds, the door will

automatically lock again.

I.5 If the latch cannot be actuated, go back to I.1.

I.6 Thumb turn lever function test (F15 only). I.7 Fasten mortise chassis plate on with the chassis

plate screws after all function tests work properly.

Turn thumb turn lever, deadbolt latch will extend;

deadbolt latch will work with Cylinder Emergency Key.

I.8 Insert Battery Cover (27) onto the Exterior Trim.

I.9 Tighten the Battery Cover into place.