Service Manual

16
Mortise Service Manual
EZ Connect Wiring
H. Interior Panel Installation
H.1 Installing Thumb Turn Spindle and Connectors
Insert Thumb Turn Spindle (15).
H.2-3 Completed
H.2 Then align the spindles with the chassis and
place it onto the interior backplate.
Ensure that the thumbturn is horizontal when the
deadbolt is in, and vertical when the deadbolt is
out/thrown.
H.4 Turn the lever to ensure proper latch
engagement. The latchbolt should retract.
H.5 Insert the 4 battery compartment screws and bottom set screws to finish installing the interior trim.