Service Manual

15
Mortise Service Manual
G.2 Inserting Micro Switch CAM
1.
Insert the Micro Switch Cam (18) on the spring cage as shown. Make sure the switch is engaged.
2. Then, move (18) to the right and align it with the spindle slot as shown.
G.3 Inserting Spindles G.4 Engaging the Micro Switch
Insert spindle (5) and spring (6) into the spring cage as
shown.
Note: The spring is not attached to anything and
can be easily misplaced. Use caution when
installing the spring.
Turn the lever to make sure (18) is properly engaged with
the Micro Switch.
Step G Completed