Service Manual

14
Mortise Service Manual
F.6 Install Cylinder F.7 Tighten Cylinder and Backplate
1. Loosen the cylinder set screw in the mortise
chassis to insert the cylinder.
2. Insert the cylinder (1) into the front panel and
ensure it sits flush with the front plate.
1.
Insert the screwdriver into the side of the lock and
tighten the cylinder.
2. Then, tighten the mortise lock set screw (22).
3. )Tighten interior backplate (17).
Step F Completed
G. Interior Assembly Preparation
G.1 Remove Battery Cover
Use Hex Wrench (14) to
loosen
long (10) and short set
screws (13).
Next remove the battery cover (27).