User manual

Pag. 11
USER MANUAL
1.OPERATING PRINCIPLE
EPS-DUAL WBD is an innovative parking sensor that uses low energy electromagnetic waves and
is able to detect the approach of any kind of obstacle .
The activation of the device isobteined by the insertion of the back gear or by pressing the activation
button (if installed on front bumper) and confirmed by a signal of “OK". Once activated, the EPS-
DUAL WBD generates around the bumper, on which is installed, a protection zone (Fig. 6).
When any obstacle present in the protection zone tends to approach the bumper you will hear a
series of beeps toghether with the lightening of the wave band display.
A) As soon as the EPS-DUAL WBD is activated the control functionality of the system is carried out
in a fraction os second.
In case of anomalies the speaker emits an audible warning signal consisting of a continuous
Beeping. If this happens check the antenna connection to the ECU and all connections.
If the check is OK you hear a signal of one single Beep to confirm the proper functioning of the
system.
B) When approaching an obstacle the system activates the acoustic and led signals at a distance
between the bumper and obstacle (measured in the central area of the bumper) of about 60 / 70
cm with 3 types of controll mode: