User's Manual

M-WN910N Wireless N CardBus Adapter
30
Figure 4-88
2. Open the Router’s Web-based Utility and click WPS link on the left of the main menu. Then
XFigure 4-3Figure 5-3X will appear. Click Add device, then you can see XFigure 4-9Figure 5-9.
Select Enter the new device’s PIN and enter the PIN value shown in XFigure 4-8Figure 5-8X,
click Connect. After that, wait for a minute until the following screens prompt that the
devices connect successfully.
Figure 4-99
4.2.2 Enter the PIN from your AP device
1. Open the WPS Utility and you will see Figure 4-5Figure 5-5. Click Next to continue. Then
Figure 4-10Figure 5-10 will appear. Select the third option and enter the PIN value which is
labeled on the bottom of the Router. Click Next.