User's Manual

M-WN910N Wireless N CardBus Adapter
29
Figure 4-7
7
4.2 PIN method
There are two ways to configure the WPS by PIN method:
1) Enter a PIN into your AP device
2) Enter the PIN from your AP device.
Following are the detailed configuration procedure of each way.
4.2.1 Enter a PIN into your AP device
1. Double click the icon on the desktop to open the WPS Utility and then you can see
the welcome screen shown as Figure 4-5
Figure 5-5. Click Next to continue. Then XFigure
4-8Figure 5-8 will appear. Select the second option and you will see a PIN value displayed
in the screen. Remember it and Click Next.