User's Manual

RY/TP7231RY/TP723F " 522Odru"Yktgnguu"P"Tqwvgt"
- 68 -
603403"Uvcvke"Tqwvkpi"
Choose menu ›Cfxcpegf"Tqwvkpi" →" U vcvke"Tqwvkpi”, and you can configure the static route in
the next screen, shown in Figure 4-62. A static route is a pre-determine
d path that network
information must travel to reach a specific host or network.
Figure 4-62 Static Routing
Vq"cff"uvcvke"tqwvkpi"gpvtkgu."hqnnqy"vjg"uvgru"dgnqy0"
1. Click Cff"Pgy” shown in Figure 4-62, you will see the following screen Figure 4-63.
Figure 4-63 Add or Modify a Static Route Entry
2. Enter the following data.
 Fguvkpcvkqp"Pgvyqtm / The Fguvkpcvkqp"Pgvyqtm is the address of the network or host
that you want to assign to a static route.
 Uwdpgv" Ocum / The Uwdpgv" Ocum determines which portion of an IP Address is the
network portion, and which portion is the host portion.
 Fghcwnv"Icvgyc{ / This is the IP Address of the default gateway device that allows for the
contact between the Router and the network or host.
3. Select Gpcdngf or Fkucdngf for this entry on the Uvcvwu drop-down list.
4. Click the Ucxg button to make the entry take effect.
Click the Fgngvg button to delete the entry.
Click the Gpcdng"Cnn button to enable all the entries.