User's Manual

RY/TP7231RY/TP723F " 522Odru"Yktgnguu"P"Tqwvgt"
- 61 -
 Jquv"- In this field, select a host from the drop-down list for the rule. The default value is the
Jquv"Fguetkrvkqp you set just now.
 Vctigv - In this filed, select a target from the drop-down list for the rule. The default value is
the Vctigv"Fguetkrvkqp you set just now.
 Uejgfwng - In this field, select a schedule from the drop-down list for the rule. The default
value is the Uejgfwng"Fguetkrvkqp you set just now.
 Uvcvwu - In this field, there are two options, Gpcdngf or Fkucdngf. Select Gpcdngf so that the
rule will take effect. Select Fkucdngf so that the rule won't take effect.
5. Click Hkpkuj to complete adding a new rule.
Ogvjqf"Vyq<"
1. Click the Cff"Pgy” button and the next screen will pop up as shown in Figure 4-52.
2.
Give a name (e.g. Rule_1) for the rule in the Twng"Pcog"field.
3. Select a host from the Jquv"drop-down list or choose “Enkem"Jgtg"Vq"Cff"Pgy"Jquv"Nkuv”.
4. Select a target from the Vctigv"drop-sown list or choose “Enkem"Jgtg"Vq"Cff"Pgy"Vctigv"
Nkuv”.
5. Select a schedule from the Uejgfwng"drop-down list or choose “Enkem" Jgtg"Vq"Cff" Pgy"
Uejgfwng”.
6. In the Uvcvwu field, select Gpcdngf"or Fkucdngf to enable or disable your entry.
7. Click the Ucxg button.
Figure 4-52 Add Internet Access Control Entry
Hqt" gzcorng: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access
www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in the
LAN to access the Internet, you should follow the settings below:
1. Click the submenu Twng"qh"Ceeguu"Eqpvtqn in the left to return to the Rule List page. Select
Enable Internet Access Control and choose "Allow the packets specified by any enabled
access control policy to pass through the Router".