User's Manual

RY/TP7231RY/TP723F " 522Odru"Yktgnguu"P"Tqwvgt"
- 58 -
 Vctigv"/ Here displays the target selected in the corresponding rule.
 Uejgfwng"/"Here displays the schedule selected in the corresponding rule.
 Cevkqp"/ Here displays the action the Router takes to deal with the packets. It could be Cnnqy
or Fgp{. Cnnqy means that the Router permits the packets to go through the Router. Fgp{
means that the Router rejects the packets to go through the Router.
 Uvcvwu"/ This field displays the status of the rule. Gpcdngf means the rule will take effect,
Fkucdngf means the rule will not take effect.
 Oqfkh{"/ Here you can edit or delete an existing rule.
Vjgtg"ctg"vyq"ogvjqfu"vq"cff"c"pgy"twng0"
Ogvjqf"Qpg<"
1. Click Ugvwr"Yk|ctf button and the next screen will appear as shown in Figure 4-48.
Figure 4-48 Quick Setup – Create a Host Entry
 Oqfg - Here are two options, KR"Cfftguu and OCE"Cfftguu. You can select either of them
from the drop-down list.
 Jquv"Fguetkrvkqp - In this field, create a unique description for the host (e.g. Host_1).
If the KR"Cfftguu is selected, you can see the following item:
 NCP"KR"Cfftguu"- Enter the IP address or address range of the host in dotted-decimal format
(e.g. 192.168.1.23). "
If the MAC Address is selected, you can see the following item:
 OCE" Cfftguu - Enter the MAC address of the host in XX-XX-XX-XX-XX-XX format (e.g.
00-11-22-33-44-AA).
2. Click Pgzv when finishing creating the host entry, and the next screen will appear as shown in
Figure 4-49.