User's Manual

RY/TP7231RY/TP723F " 522Odru"Yktgnguu"P"Tqwvgt"
- 39 -
2. Select the radio button “Allow the stations specified by any enabled entries in the list to
access” for Hknvgtkpi"Twngu.
3. Delete all or disable all entries if there are any entries already.
4. Click the
Cff"Pgy000 button.
1) Enter the MAC address
00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the OCE"Cfftguu field.
2) Enter wireless station A/B in the Fguetkrvkqp field.
3) Select Gpcdngf in the Uvcvwu drop-down list.
4) Click the Ucxg button.
5) Click the Dcem button.
The filtering rules that configured should be similar to the following list:
60806" Yktgnguu"Cfxcpegf"
Choose menu “Yktgnguu" →" Yktgnguu"Cfxcpegf”, you can configure the advanced settings of
your wireless network.
Figure 4-24 Wireless Advanced
 Vtcpuokv"Rqygt"/"Here you can specify the transmit power of Router. You can select High,
Middle or Low which you would like. High is the default setting and is recommended.
 Dgceqp"Kpvgtxcn"/" Enter a value between 40-1000 milliseconds for Beacon Interval here.
The beacons are the packets sent by the Router to synchronize a wireless network. Beacon
Interval value determines the time interval of the beacons. The default value is 100.