User's Manual

RY/TP7231RY/TP723F " 522Odru"Yktgnguu"P"Tqwvgt"
- 26 -
e.g.
NSW / ACT - puy0dkirqpf0pgv0cw
VIC / TAS / WA / SA / NT - xke0dkirqpf0pgv0cw
QLD - snf0dkirqpf0pgv0cw
 OVW"Uk|g"/"The normal"OVW (Maximum Transmission Unit) value for most Ethernet networks
is 1500 Bytes. It is not recommended that you change the default OVW"Uk|g unless required
by your ISP.
 Eqppgev"qp"Fgocpf"/ In this mode, the Internet connection can be terminated automatically
after a specified inactivity period (Ocz"Kfng"Vkog) and"be"re-established when you attempt to
access the Internet again." If you want your Internet connection keeps active all the time,
please enter “0” in the Ocz"Kfng"Vkog field.
Otherwise, enter the number of minutes you want
to have elapsed before your Internet access disconnects.
 Eqppgev"Cwvqocvkecnn{"/ The connection can be re-established automatically when it was
down.
 Eqppgev" Ocpwcnn{"/" You can click the Eqppgev/Fkueqppgev"button to connect/disconnect
immediately."This mode also supports the Ocz"Kfng"Vkog function as Eqppgev"qp"Fgocpf
mode. The Internet connection can be disconnected automatically after a specified inactivity
period and"re-established when you attempt to access the Internet again. "
Click the Eqppgev button to connect immediately. Click the Fkueqppgev button to disconnect
immediately.
Ecwvkqp: Sometimes the connection cannot be terminated although you specify a time to Max Idle
Time because some applications are visiting the Internet continually in the background.
Click the Ucxg button to save your settings.
70" If your ISP provides L2TP connection, please select N4VR1Twuukc" N4VR option. And you
should enter the following parameters (Figure 4-11):