User's Manual

RY/TP7231RY/TP723F " 522Odru"Yktgnguu"P"Tqwvgt"
- 24 -
 Vkog/dcugf" Eqppgevkpi" / The connection will only be established in the period from the
start time to the end time (both are in HH:MM format).
"
Pqvg<"
Only when you have configured the system time on “U{uvgo" Vqqnu" Vkog”" page, will the
Vkog/dcugf"Eqppgevkpi function can take effect.
 Eqppgev" Ocpwcnn{"/" You can click the Eqppgev/Fkueqppgev"button to connect/disconnect
immediately."This mode also supports the Ocz"Kfng"Vkog function as Eqppgev"qp"Fgocpf
mode. The Internet connection can be disconnected automatically after a specified inactivity
period and"re-established when you attempt to access the Internet again. "
Click the Eqppgev button to connect immediately. Click the Fkueqppgev button to disconnect
immediately.
Ecwvkqp: Sometimes the connection cannot be terminated although you specify a time to Max Idle
Time because some applications are visiting the Internet continually in the background.
If you want to do some advanced configurations, please click the Cfxcpegf"button, and the page
shown in Figure 4-9 will then appear:
Figure 4-9 PPPoE Advanced Settings
 OVW" Uk|g" / The default MTU size is “1480” bytes, which is usually fine. It is not
recommended that you change the default OVW"Uk|g unless required by your ISP.
 Ugtxkeg"Pcog1CE"Pcog"/ The service name and AC (Access Concentrator) name should
not be configured unless you are sure it is necessary for your ISP.
In most cases, leaving
these fields blank will work.
 KUR"Urgekhkgf"KR"Cfftguu"/"If your ISP does not automatically assign IP addresses to the