User's Manual

RY/TP7231RY/TP723F " 522Odru"Yktgnguu"P"Tqwvgt"
- 15 -
necessary to change the wireless channel unless you notice interference problems with
another nearby access point.
 Ocz"Vz"Tcvg"/ You can limit the maximum transmission rate of the Router through this
field.
 Fkucdng" Ugewtkv{" / The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the Router without encryption. It is
recommended strongly that you choose one of following options to enable security.
 YRC/RUM1YRC4/RUM"/ Select WPA based on pre-shared passphrase.
 RUM"Rcuuyqtf - You can enter CUEKK or Jgzcfgekocn characters.
For CUEKK, the key can be made up of any numbers 0 to 9 and any letters A to Z, the
length should be between 8 and 63 characters.
For Jgzcfgekocn, the key can be made up of any numbers 0 to 9 and letters A to F,
the length should be between 8 and 64 characters.
Please also note the key is case sensitive, this means that upper and lower case
keys will affect the outcome. It would also be a good idea to write down the key and
all related wireless security settings.
 Pq"Ejcpig"/ If you chose this option, wireless security configuration will not change!
These settings are only for basic wireless parameters. For advanced settings, please refer to
4.6 Wireless
.
5. Click the Pgzv button. You will then see the Hkpkuj page as shown in Figure 3-12.
C
lick the Hkpkuj"button to finish the Swkem"Ugvwr.
Figure 3-12 Quick Setup - Finish