User's Manual

PW-RN401/PW-RN401D
150M Wireless N Router
- 59 -
4.11 Bandwidth Control
You can configure the Bandwidth control function on this page shown inFigure 4-47:
Figure 4-47 Bandwidth Control
 Enable IP QoS - Enable or disable the function of IP QoS.
 Choose BandWidth Type - Select the network connection type from the drop-down list.
 Bandwidth Apply - The bandwidth you get. If you are not clear about that, please contact
with your ISP for help.
 IP Range - IP range of this entry.
 Mode - There are two types of mode: Minimum Bandwidth Guarantee and Maximum
Bandwidth Limit.
 Bandwidth - The bandwidth you supply to this entry.
 Description - The description for this entry.
Click Enable to enable this entry.
Click the Clear button to clear a single entry.
Click the Clear All button to clear all entries.
Click the Save button to save all configurations.

Note:
1. The conversion relation of bandwidth: 1Mbps = 1000Kbps.