User's Manual

PW-RN401/PW-RN401D
150M Wireless N Router
- 33 -
Figure 4-15 Wireless Security
 Disable Security - If you do not want to use wireless security, check this radio button. But it’s
strongly recommended to choose one of the following modes to enable security.
 WEP - It is based on the IEEE 802.11 standard. If you check this radio button, the page will
appear as shown in Figure 4-16.
Figure 4-16
 Type - you can choose the type for the WEP security on the pull-down list. The default
setting is Automatic, which can select Shared Key or Open System authentication type
automatically based on the wireless station's capability and request.