User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for AP Mode
- Chapter 5. Configuration for Router Mode
- Chapter 6. Configuration for Repeater Mode
- Chapter 7. Configuration for Bridge Mode
- Chapter 8. Configuration for Client Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
PW-RN401M
150Mbps Wireless N Nano Router
- 98 -
5.14 System Tools
Figure 5-53 The System Tools menu
There are nine submenus under the System Tools menu: Time, Diagnostic, Firmware, Factory
Defaults, Backup and Restore, Reboot, Password, System Log and Statistics. Click any of
them, and you will be able to configure the corresponding function. The detailed explanations for
each submenu are provided below.
5.14.1 Time
You can set time manually or get GMT from the Internet for the router on this page:
Figure 5-54 Time settings
Time Zone - Select your local time zone from this pull-down list.
Date - Enter your local date in MM/DD/YY into the right blanks.
Time - Enter your local time in HH/MM/SS into the right blanks.
To set time manually, follow the steps below:
1. Select your local time zone.