User's Manual
Table Of Contents
Wireless Lite-N USB Module User Guide
PW-MN427
- 29 -
Figure 5-4
Step 8. In the prompt page shown below, select Use the Following IP Address, and set the IP
and Subnet mask. After completing setting, click OK.
Figure 5-5
)
Note:
Please set the IP address in different network segment with the other network card to avoid
conflict.
Step 9. Launch RL51 Wireless Lite-N Client Utility, then highlight the Network Name (SSID)
beginning with “PSP” in the “Network” page, and click Connect.