User's Manual

Wireless Lite-N USB Module User Guide PW-MN427
- 20 -
Chapter 4 AP Mode
Click the icon to switch to AP Mode. In this mode you can use the PW-MN427 as a soft AP.
Figure 4-1
)
Note:
At this time, if your PC have Installed other network card (wireless or wire), you will be prompted
“ICS Select WAN Module” to select one of them to be “WAN”. With this function PW-MN427 can
serve as wireless router based on the selected card connecting to the Internet, which will make
the APs of the LAN share the Internet.
Figure 4-2
4.1 Config
Here you can do some basic configurations.