User's Manual

Wireless Lite-N USB Module User Guide PW-MN427
- 14 -
¾ Apply - Click the Apply button to save the current setting.
3.1.4 Statistics
Click the Statistics tab of the Utility and you will see the following screen displaying the receiving
and transmitting statistical information. Click the Reset Counter button to reset the count of the
statistics information.
Figure 3-7 Statistics tab
3.1.5 WPS
Click the WPS tab of the Utility and you can configure the WPS function to joint an existing
network quickly in the following screen.
Figure 3-8 WPS tab
¾ The WPS connection will be automatically displayed on the WPS Profile List. Pitch on the
Profile and click Export Profile to add a Profile to the Profile List (Section 3.1.1).
¾ The Auto function is default to enable that the Module will automatically try to build the
connection with the Access Point devices shown in the WPS AP List one by one.
¾ You can also establish a wireless connection by using either Push WPS Button method or
PIN method. It is recommended that you choose the simplest method that your AP device