Operating Instructions

PW-MN427_56I 150Mbps Wireless N USB Module User Guide
- 29 -
4.1 Config AP
Click the Config AP icon to load the following screen and set the AP as you need.
Step 1. Click Config AP icon
, the following screen will pop up. Click Next icon to
continue.
Figure 4-4 Config AP
 SSID - Enter the SSID of your soft AP, for example, you can name it My Network instead of
the default name SoftAP-58.
Step 2. Here you can select country region and set the AP’s channel.
Figure 4-5
 Channel - Select the channel from the drop-down list. This field determines which operating
frequency will be used.

Note:
There is no option about country/region for American users to choose on the software’s
interface of products.