User's Manual

Wireless Lite-N USB Module User Guide PW-MN427
- 16 -
Figure 3-10 WPS - Registrar mode
) Note:
The default PIN code of the AP always can be found in its label or User Guide.
2) Enter the PIN into my Access Point
Choose the Config Mode as Enrollee and click the PIN button on the screen as Figure 3-11.
Meanwhile, enter the PIN code of the Module into the configuration utility of the AP. For the
detailed instructions of the AP configuration, please refer to the User Guide of the AP.
Figure 3-11 WPS - enrollee mode
)
Note:
The PIN code of the Module is displayed on the WPS configuration screen as Figure 3-11 (the
default PIN code for this Module is 08781949 as Figure 3-11 shown).
3.1.6 Radio On/Off
You can turn on/off the wireless radio by clicking the icon of the Utility. The green icon will turn
to red
when the wireless radio is turned off.