User's Manual

PW-DN427 Wireless N USB Adapter User Guide
- 36 -
Step 5. Right-click “My Computer” and select Management. In the prompt page, click Device
Manager, then right-click “Wireless N Client Adapter “and select Properties. Then set
the value of “PSP Xlink Mode” as Enable following the red marked instruction in the
figure.
Figure 5-2
Step 6. Click Start > Control Panel > Network.
Figure 5-3
Step 7. Right-click Wireless Network Connection icon , and select Properties. In the
following prompt page, highlight Internet Protocol (TCP/IP) and click Properties.