User's Manual

PW-DN427 Wireless N USB Adapter User Guide
- 31 -
Interval value determines the time interval of the beacons. The default value is 100.
 TX Power - Manually force the AP’s transmitting power. System default is 100%.
 Idle Time - Manually force the Idle Time using a selected value. The default is 300.
4.3 Access Control List
Click the Access Control List icon of the utility and the Access Control List screen will
appear as Figure 4-9. In this page, you can enable/disable the AP to connect with the specified
Mac address. Click Allow All, and enter the Mac address allowed to connect to your AP in the
empty field beside MAC Address, and then click
to add it to the list, shown in Figure 4-10.
Highlight an existing Mac address in the list and click
to remove it from the list as shown in
Figure 4-11. When clicking
, you will clear all the Mac addresses in the Access Control List as
Figure 4-12.
Figure 4-9 Access Control Function
 Access Policy - This field allows you to start the function or not. System default is disabled.
• Disable - Disable the Access Policy feature.
• Allow All - Allow all the MAC addresses in the Access List to access the AP.
• Reject All - Disable all the MAC addresses in the Access List to access the AP.
 Mac Address - Manually force the Mac address using the function.
 Apply - Click to make the settings take effect.