User Manual

PW-AN401/PW-AN401D 150M Wireless N Access Point User Guide
70
Appendix A: Application Example
The PW-AN401/PW-AN401D allows you to connect a wireless device to the wired network.
Providing that you want to connect your computer equipped with wireless adapter to a wired
network wirelessly, you can take the following instructions.
1. Configure the AP via a wired connection.
1) Connect your AP to your PC with an Ethernet cable.
2) Configure the IP address for your PC to communicate with the AP referring to 3.1
Configure the PC.
3) Log on to the web-based management page. Configure your AP in the Access Point
mode and check the Enable SSID Broadcast box referring to 4.7.1 Wireless Settings
.
4) View the Wireless > Wireless Settings page and keep the SSID of the AP in mind.
(Here we choose as the SSID for example.) You are suggested to change the SSID and
secure your wireless network referring to 4.7.1 Wireless Settings
and 4.7.2 Wireless
Security.
5) Remove the Ethernet cable between the AP and your PC.
2. Connect your AP to the LAN port on the Router with an Ethernet cable.
3. Configure your PC to connect to the network wirelessly.
1) Click start (in the lower left corner of the PC’s screen), right-click My Network
Connections and choose Properties.