User Manual
Table Of Contents
- Package Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Quick Installation Guide
- Chapter 4 Configure the Device
- Appendix A: Application Example
- Appendix B: Factory Defaults
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
PW-AN401/PW-AN401D 150M Wireless N Access Point User Guide
17
Figure 3-18 Network Settings
)
Note:
1. These settings are only for basic wireless parameters, for advanced settings, please refer
to Section 4.7 Wireless.
2. To change to another mode, please refer to T3 in Troubleshooting to assign a static IP
address 192.168.0.100 for your computer first before logging in the management page.
6. Click the Next button. You will then see the Finish page. Here takes the settings for Access
Point mode for example.
¾ Because there is something changed of the configuration, you will see the Finish page as
shown in Figure 3-19. Check your settings and click Save to save
your settings for future
reference.