User's Manual

PW-3G401/PW-3G401D 3G Wireless N Router
3. Select Enabled or Disabled for this entry on the Status pull-down list.
4. Click the Save button to make the entry take effect.
Other configurations for the entries:
Click the Delete button to delete the entry.
Click the Enable All button to enable all the entries.
Click the Disable All button to disable all the entries.
Click the Delete All button to delete all the entries.
Click the Previous button to view the information in the previous screen, click the Next button
to view the information in the next screen.
4.12.2 System Routing Table
Choose menu “Static Routing → System Routing Table”, the system route can be list in the
table as shown in the next screen.
Figure 4-63 System Routing Table
4.13 Bandwidth Control
Figure 4-64 Bandwidth Control
There are two submenus under the Bandwidth Control menu. Click any of them, and you will be
able to configure the corresponding function. The detailed explanations for each submenu are
provided below.
4.13.1 Control Settings
Choose menu “Bandwidth Control → Control Settings”, you can configure the Egress
Bandwidth and Ingress Bandwidth in the next screen. Their values you configure should be less
than 100000Kbps. For optimal control of the bandwidth, please select the right Line Type and
ask your ISP for the total bandwidth of the egress and ingress.
-82-