User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G USB Modem
PW-3G401/PW-3G401D 3G Wireless N Router
List and System Routing List. Click any of them, and you will be able to configure the
corresponding function.
4.12.1 Static Routing List
Choose menu “Static Routing → Static Routing List”, you can configure the static route list
in the next screen (shown in Figure 4-61). A static route is a pre-determin
ed path that network
information must travel to reach a specific host or network.
Figure 4-61 Static Routing
To add static routing entries:
1. Click Add New… shown in Figure 4-61, you will see the following screen.
Figure 4-62 Add or Modify a Static Route Entry
2. Enter the following data:
Destination IP Address - The Destination IP Address is the address of the network
or host that you want to assign to a static route.
Subnet Mask - The Subnet Mask determines which portion of an IP Address is
the network portion, and which portion is the host portion.
Gateway - This is the IP Address of the gateway device that allows for contact between
the Router and the network or host.
-81-