User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G USB Modem
PW-3G401/PW-3G401D 3G Wireless N Router
Figure 4-21 Wireless Security
Disable Security
- If you do not want to use wireless security, select this check box, but it’s
strongly recommended to choose one of the following modes to enable security.
WPA/WPA2-Personal (Recommended) - It’s the WPA/WPA2 authentication type based
on pre-shared passphrase.
Version - you can choose the version of the WPA-PSK security on the drop-down list.
The default setting is Automatic, which can select
WPA-Personal (Pre-shared key of
WPA) or WPA2-Personal (Pre-shared key of WPA) automatically based on the wireless
station's capability and request.
Encryption - When WPA-Personal or WPA2- Personal is set as the Authentication
Type, you can select either Automatic, or TKIP or AES as Encryption.
Note:
If you check the WPA/WPA2-Personal radio button and choose TKIP encryption, you
will find a notice in red as shown in Figure 4-22.
-47-