User's Manual

PW-3G401/PW-3G401D 3G Wireless N Router
3. If your ISP provides a PPPoE/Russia PPPoE connection, select PPPoE/Russia PPPoE
option. And you should enter the following parameters (Figure 4-12):
Figure 4-12 WAN – PPPoE/Russia PPPoE
 User Name/Password - Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
 Secondary Connection - It’s available only for PPPoE/Russia PPPoE Connection. If your
ISP provides an extra Connection type such as Dynamic/Static IP to connect to a local area
network, then you can check the radio button of Dynamic/Static IP to activate this
secondary connection.
 Disabled - The Secondary Connection is disabled by default, so there is PPPoE
connection only. This is recommended.
 Dynamic IP - You can check this radio button to use Dynamic IP as the secondary
connection to connect to the local area network provided by ISP.
 Static IP - You can check this radio button to use Static IP as the secondary
connection to connect to the local area network provided by ISP.
 Connect on Demand - In this mode, the Internet connection can be terminated
automatically after a specified inactivity period (Max Idle Time) and be re-established
-34-