User's Manual

PW-3G401/PW-3G401D 3G Wireless N Router
4.5.2 3G
Choose menu “Network→3G”, you can configure parameters for 3G function on the screen
below. To use the 3G function, you should first insert your USB modem on the USB port of the
Router. If the USB modem is unplugged, corresponding information will be shown as in Figure
4-6. There are already much 3G USB modem information emb
edded in the router. The USB
modem parameters will be set automatically if the card is supported by the Router. If your USB
modem inserted is supported by the Router, then your modem model will be shown in the 3G
USB Modem field. Otherwise, “Unknown Modem” will be shown instead. Please visit our
website to get the latest USB modems compatibility list.

Note:
3G settings are unavailable when the Internet Access mode is set to WAN Only mode. Please
change settings on Internet Access
if you want to use 3G.
Figure 4-6 3G
 Location - Please select the location where you're enjoying the 3G card.
 Mobile ISP - Please select the ISP (Internet Service Provider) you apply to for 3G service.
The router will show the default Dial Number and APN of that ISP.
 Connect on Demand - You can configure the Router to disconnect your Internet
connection after a specified period of the Internet connectivity (Max Idle Time). If your
Internet connection has been terminated due to inactivity, Connect on Demand enables
the Router to automatically re-establish your connection as soon as you attempt to access
-28-