User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G USB Modem
PW-3G401/PW-3G401D 3G Wireless Lite-N Router
connection type your ISP provides. Make sure the cable is securely plugged into the WAN
port before detection. The appropriate configuration page will be displayed when an active
Internet service is successfully detected by the Router.
Figure 3-8
¾ If the connection type detected is PPPoE, the next screen will appear as shown in Figure 3-9.
Enter the User Name and Password provided by your ISP. These fields are case-sensitive. If
you have difficulty with this process, please contact your ISP.
Figure 3-9 Quick Setup – PPPoE
¾ If the connection type detected is Dynamic IP, the next screen will appear as shown in Figure
3-11. Then you can go on with the wireless configuration.
¾ If the connection type detected is Static IP, the next screen will appear as shown in Figure
3-10. Enter the parameters in the corresponding blanks.
-13-