User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Router Configuration – 3G Router Mode
- Chapter 5. Router Configuration – Wireless Router Mode
- Chapter 6. Router Configuration— Standard AP Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G/4G USB Modem
PW-3G401M 3G Wireless N Nano Router
4.13 Advanced Routing
Figure 4-65 Advanced Routing
There are two submenus under the Advanced Routing menu as shown in Figure 4-65: Static
Routing List and System Routing Table. Click any of them, and you will be able to configure
the corresponding function.
4.13.1 Static Routing List
Choose menu “Advanced Routing → Static Routing List”, you can configure the static route
in the next screen (shown in Figure 4-66). A static route is a pre-determined path that network
information must travel to reach a specific host or network.
Figure 4-66 Static Routing
To add static routing entries:
1. Click Add New… shown in Figure 4-66, you will see the following screen.
Figure 4-67 Add or Modify a Static Route Entry
-90-