User's Guide

PW-3G401M 3G Wireless N Nano Router
For 64-bit encryption - You can enter 10 hexadecimal digits (any combination of 0-9,
a-f, A-F, and null key is not permitted) or 5 ASCII characters.
For 128-bit encryption - You can enter 26 hexadecimal digits (any combination of 0-9,
a-f, A-F, and null key is not permitted) or 13 ASCII characters.
For 152-bit encryption - You can enter 32 hexadecimal digits (any combination of 0-9,
a-f, A-F, and null key is not permitted) or 16 ASCII characters.
z WPA/WPA2-Personal
Version - You can select one of following versions:
Automatic - Select WPA-Personal or WPA2-Personal automatically based on the
wireless station's capability and request.
WPA-Personal - Pre-shared key of WPA.
WPA2-Personal - Pre-shared key of WPA2.
Encryption - You can select either Automatic, or TKIP or AES.
Password - You can enter ASCII or Hexadecimal characters. For Hexadecimal, the
length should be between 8 and 64 characters; for ASCII, the length should be
between 8 and 63 characters.
Group Key Update Period - Specify the group key update interval in seconds. The
value can be either 0 or at least 30. Enter 0 to disable the update.
z Not Change - If you chose this option, wireless security configuration will not change!
6. Click Finish/Reboot to complete the Quick Setup.
Figure 3-29 Quick Setup – Finish
)
Note:
z In Access Point/ Repeater/ Bridge with AP Mode, after rebooting, please reconnect to the
network (with a new SSID and Password you’ve set in the previous step). You can refer to
3.3.2 Connect to Network for the details.
z If you have any difficulty with these steps, please refer to the User Guide on the Resource
CD for detailed instructions.
-28-