User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Router Configuration – 3G Router Mode
- Chapter 5. Router Configuration – Wireless Router Mode
- Chapter 6. Router Configuration— Standard AP Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G/4G USB Modem
PW-3G401M 3G Wireless N Nano Router
Figure 3-27 Quick Setup – Bridge with AP
z Wireless Network Name (SSID) - Enter a string of up to 32 characters. To achieve
more information, you can read the same glossary in Access Point part.
z Region - This field determines which operating frequency will be used. To achieve
more information, you can read the same glossary in Access Point part.
z Channel - This field determines which operating frequency will be used. To achieve
more information, you can read the same glossary in Access Point part.
z Add a remote AP - Click the Survey button to fill in the MAC of remote AP (1-4) field.
z MAC of remote AP (1-4) - Enter the MAC address of AP that you want to access.
¾ If Client is selected, you will be prompted the below page. Click Survey to search and
Connect your target AP, and set your security mode as well as password.
-26-