User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Router Configuration – 3G Router Mode
- Chapter 5. Router Configuration – Wireless Router Mode
- Chapter 6. Router Configuration— Standard AP Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G/4G USB Modem
PW-3G401M 3G Wireless N Nano Router
Figure 3-26 Quick Setup – Repeater
z Name of remote AP (SSID) - Enter the name of a remote AP (also called the SSID)
that you want to access. Click the Survey button behind it, you can choose one of
searching results to fill in this field.
z MAC Address - Enter the MAC address of AP that you want to access. When you
use the survey function to fulfill the Name of remote AP (SSID), this field will be filled
in automatically.
z Region - This field determines which operating frequency will be used. To achieve
more information, you can read the same glossary in Access Point part.
¾ If Bridge with AP is selected, you will be prompted the below page. Set a unique and
easy-to-remember wireless network name (SSID), select your region. Click Survey to
search and Connect your target remote AP(s). Set your wireless security, where you
can select Use the Previous Settings to keep the same with the remote AP(s) you’ve
connected, or set a different one.
-25-