User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Router Configuration – 3G Router Mode
- Chapter 5. Router Configuration – Wireless Router Mode
- Chapter 6. Router Configuration— Standard AP Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G/4G USB Modem
PW-3G401M 3G Wireless N Nano Router
Figure 3-25 Quick Setup – AP
z Wireless Network Name (SSID) - Enter a string of up to 32 characters. The same
Name (SSID) must be assigned to all wireless devices in your network. The default
SSID is set to be Wireless_xxxxxx (xxxxxx indicates the last unique six characters of
each Router's MAC address), which can ensure your wireless network security. But it
is recommended strongly that you change your networks name (SSID) to a different
value. This value is case-sensitive. For example, MYSSID is NOT the same as
MySsid.
z Region - Select your region from the pull-down list. This field specifies the region
where the wireless function of the Router can be used. It may be illegal to use the
wireless function of the Router in a region other than one of those specified in this
filed. If your country or region is not listed, please contact your local government
agency for assistance.
z Channel - This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference problems
with another nearby access point. If you select auto, then the AP will select the best
channel automatically.
¾ If Repeater is selected, you will be prompted the below page. Click Survey to search
and Connect your target remote AP, select your region, and set your security mode
as well as password which are the same as the root AP you’ve connected.
-24-