User's Guide

PW-3G401M 3G Wireless N Nano Router
connection. Right click Wireless Network Connection, and select Properties.
2. For Windows XP, double click Internet Protocol (TCP/IP) in the item list; for Windows 7,
double click Internet Protocol Version 4 (TCP/IPv4).
3. Select “Use the following IP address”, enter the 192.168.0.x as the IP address (x can be
any number from 1 to 253), 255.255.255.0 as the Subnet mask; select “Use the following
DNS server addresses”, enter the DNS server address provided by your ISP or network
administrator.
4. Click OK to finish the settings.
3.3.2 Connect to Network
1. Click the icon at the bottom of your desktop.
2. Click “Refresh network list”, and then select the network. Click Connect.
)
Note:
The default SSID of the network is Wireless_xxxxxx. (The xxxxxx is the last six characters of
the Router’s MAC address.)
3. When Connected appears, you’ve successfully connected to the wireless network.
3.3.3 Router Configuration
1. To access the configuration utility, open a web-browser and type the default address
http://192.168.1.1
in the address field of the browser.
Figure 3-20 Login the Router
2. After a moment, a login window will appear, similar to the Figure 3-21. Enter admin for the
User Name and Password, both in lower case letters. Then click the OK button or press the
Enter key.
-21-