User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Router Configuration – 3G Router Mode
- Chapter 5. Router Configuration – Wireless Router Mode
- Chapter 6. Router Configuration— Standard AP Mode
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
- Appendix E: Compatible 3G/4G USB Modem
PW-3G401M 3G Wireless N Nano Router
¾ If the WAN connection type detected is Static IP, you will be prompted to set the necessary
parameters as IP Address, Subnet Mask, Default Gateway, Primary/Secondary DNS,
which are provided by your ISP.
Figure 3-17 Quick Setup - Static IP
z IP Address - This is the WAN IP address seen by external users on the Internet
(including your ISP). Enter the IP address into the field.
z Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually
255.255.255.0.
z Default Gateway - Enter the gateway IP address into the box if required.
z Primary DNS - Enter the DNS Server IP address into the box if required.
z Secondary DNS - If your ISP provides another DNS server, enter it into this field.
6. Set a unique and easy-to-remember Wireless Network Name, select your Region from
the drop-down-list. And it’s recommended to select WPA-Personal/WPA2-Personal as the
wireless security and set your own Password. As for other parameters, you can leave it
default. Then click Next.
-19-